fixed mqtt issues

soil_moisture.py

@@ -2,15 +2,19 @@ import thingspeak
 import time
 import paho.mqtt.publish as publish
 from ADCDevice import *
+from PCF8574 import PCF8574_GPIO
+from Adafruit_LCD1602 import Adafruit_CharLCD
 
 adc = ADCDevice()
 
 ts_channel_id = 1564450
 ts_write_key = 'JK4S0XWAC8YK9GDU'
 
+#mqtt sever and channel path settings
 mqtt_soil_server = "192.168.0.25"
 mqtt_soil_path_one = "soil_one"
 mqtt_soil_path_two = "soil_two"
+mqtt_soil_path_avg = "soil_average"
 #sensor calibration, Garrus would be proud
 one_dry_reading = 202
 one_wet_reading = 80
@@ -36,6 +40,10 @@ def cpu_temp_finder():
 #main driver for measurments and MQTT
 def main_loop(channel):#insert channel variable when setting up thingspeak
 	#LCD initialisation goes here
+	
+	mcp.output(3,1)
+	lcd.begin(16,2)
+	
 	try:
 		
 		#get sensor reading and percentage conversions
@@ -57,21 +65,41 @@ def main_loop(channel):#insert channel variable when setting up thingspeak
 		print('soil two: %d%%' % soil_two_percent)
 		print('soil average: %d%%' % soil_avg)
 		print('CPU temp @: ', cpu_ts)
-		#publish sensor info to MQTT server
-		
-		#publish.single(mqtt_soil_path_one, stuff, hostname= mqtt_soil_server)
 		
+		#publish sensor info to MQTT server
+		publish.single(mqtt_soil_path_one, soil_one_percent, hostname= mqtt_soil_server)
+		publish.single(mqtt_soil_path_two, soil_two_percent, hostname= mqtt_soil_server)
+		publish.single(mqtt_soil_path_avg, soil_avg, hostname= mqtt_soil_server)
 		#send to thingspeak
 		test = 5
 		response = channel.update({'field1': soil_one_percent, 'field2': soil_two_percent, 'field3': soil_avg, 'field4': cpu_ts})
 		
 		#print to the LCD display
+		
+		#lcd.setCursor(0,0)
+		#lcd.message('Soil avg: ' + soil_avg)
+		#ldc.message('CPU Temp: ' + cpu_temp_finder())
+		
 	except:
 		print('failed')
-#LCD display code
+		
+#LCD display code from freenove kit for lcd screen functionality 
+pcf_address = 0x27
+pcfA_adress = 0x3F
+try:
+	mcp = PCF8574_GPIO(pcf_address)
+except:
+	try:
+		mcp = PCF8574_GPIO(pcfA_adress)
+	except:
+		print('failed to find I2C address')
+		exit(1)
+
+lcd = Adafruit_CharLCD(pin_rs = 0, pin_e = 2, pins_db = [4,5,6,7], GPIO = mcp)
 		
 def destroy_all():
 	adc.close()
+	lcd.clear()
 	
 if __name__ == '__main__':
 	#thingspeak channel settings here